APC Back-UPS 600 (BX600I-IN)
- Replacement battery (1) is available
- 600VA/360W compact tower Back-UPS
- Automatic Voltage Regulation helps correct utility voltage
- Visual LED and audible alarms for early and easy notifications
- Resettable circuit breaker helps protect UPS during overload conditions
- Battery Connector for safe transport and shipping
features
- Topology -Line interactive.
- Output Connection - (3) India 2/3-pin 6A (Battery Backup).
- Inbuilt AVR.
- Boost Automatic Voltage Regulation (AVR).
- Battery and surge protected outlets.
- Cold-start capable.
- Generator compatibility.
- UPS can withstand at Minimum load.
- Front panel LED display.
frequently asked questions
To disable battery saver option,kindly follow the below steps :
* Press the BATTERY SAVER button to deactivate the battery saver feature.
* Battery saver LED will turn off indicating that the battery saver mode is disabled .
* Press the BATTERY SAVER button to deactivate the battery saver feature.
* Battery saver LED will turn off indicating that the battery saver mode is disabled .
When the UPS runs on battery operation and the battery becomes discharged, the UPS automatically
switches off. When adequate power is restored to the UPS (and is within the operating voltage range
of the UPS) it will restart in online operation.
The no load shutdown feature works when the Battery Saver mode is enabled and the Back-UPS is
in the On Battery mode.
It will load from 30 Watts to 50 Watts , so should run for 50 - 60 min as per official documentation.
Onsite repair Or Replace.
No, we can't set the sensitivity to BX600CI-IN manually. The BX600C-IN intelligently
adjusts the sensitivity to tune to the power conditions in your region.
There is no user selectable manual settings.
There is no user selectable manual settings.
This feature helps the UPS to offer consistent runtime during the lifetime of the battery.
It increases battery life up to two times. Runtime of the connected equipment will reduce
when this feature is enabled.
Press the BATTERY SAVER button to activate the battery saver feature. Battery saver LED will illuminate to indicate the UPS is working in the battery saver mode.
Press the BATTERY SAVER button to activate the battery saver feature. Battery saver LED will illuminate to indicate the UPS is working in the battery saver mode.
download pdf
